Materials Managing Energy UNIT 1
This power unit is developed for your fork lift marketplace, consisting of really efficient gear pump, DC motor, guide increase and decrease valve, tank, ect. The up and down movement are controlled by the lever of the guide release valve, and that is outfitted with an electric switch to activate the motor. The lowing speed is controlled from the pressure compensated flow manage valve.
1. The duty of this power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean all of the hydraulic elements concerned ahead of installation of the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which should also be clean and cost-free of impurities, N46 hydraulic oil is recommended .
4. Oil changing is needed following the first 100 operation hrs, afterwards after each and every 3000 hrs.
5. The energy unit proven is created to be mounted horizontally.
Materials Managing Energy UNIT two
This electrical power unit attributes electrical power up gravity down circuit. Activate the begin solenoid to start the motor to lift the machine. The lowing movement is activated from the solenoid valve using the decreasing speed controlled from the stress compensated flow control valve. Goods of this series is often widely used in the market of logistic devices for instance fork lift, mini lift table, and so forth.
one. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean every one of the hydraulic parts concerned just before mounting the energy unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst,which should really also be clean and absolutely free of impurities, N46 hydraulic oil is suggested .
four. Oil modifying is required immediately after the original 100 operation hrs,afterwards the moment every 3000 hours.
five. The power unit really should be mounted horizontally.