Any injury about the teeth surfaces of the sprocket diminishes the daily life on the conveyor chain.
With typical sprockets, considerably worn sprocket teeth have been repaired by teeth padding or even the whole sprocket was replaced. In either situation, repair was pricey and with teeth padding, accuracy was impaired. We designed new sprockets with detachable teeth for independent replacement. This sprocket is extremely rated by our consumers for your dramatic cost savings in expense and time.
The teeth might be replaced by two solutions: personal tooth replacement or sectional teeth substitute.
The bolts and nuts utilized for mounting the teeth on towards the sprocket are spot-welded to prevent loosening.
The respective structures are illustrated within the appropriate.
The over photo and also the best appropriate illustration present a sprocket for individual tooth replacement. Because the joint face among the replaced teeth as well as the sprocket is formed in a exceptional arc, the bonding accuracy is substantial as well as sprocket power is enhanced. Furthermore, because the load acting about the mounting bolts is decreased, there exists much less likelihood of loosening. This sprocket building is patented.
There are actually two styles of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are used for significant sprockets getting hefty loads and welded sheet steel hubs for other applications.