Product Description

Substantial Quality Air Compressor Spare Areas Coupling Element 5.3129. for Kaeser Compressor 5.3129E3 E30

Merchandise Description

 

The composition of the coupling areas:

There are 2 types of couplings for screw air compressors: Rubber pin sort and versatile (diaphragm sort) couplings.

one.The rubber pin coupling is composed of 2 half couplings, flywheel, transmission core and screws. The rubber push main of this kind of coupling is easy to dress in and wear, which will result in the equipment to shift erratically, which will have adverse consequences on the rotor, bearings, and shaft seals. At present, it is gradually changed by adaptable couplings.

2.The flexible coupling is composed of 2 50 percent couplings, connecting barrels, transmission gaskets and screws. The 2 50 percent-couplings of this coupling are analyzed for dynamic equilibrium, and the relative positions are set throughout installation.

 

 

The coupling is an crucial portion that transmits the electrical power of the motor to the active rotation of the compressor. Thanks to the higher velocity of the screw air compressor, the demands for the set up precision (coaxiality) of the coupling are also substantial. Inappropriate installation of the coupling will not only cause the equipment to run erratically and enhance sounds, but also cause irregular injury to the rotor, primary bearing, thrust bearing and shaft seal, ensuing in overhaul of the primary engine.

Coupling Attributes

  • Excellent commencing functionality can change the load beginning of the motor to no-load commencing, so as to recognize the comfortable commencing of the operating equipment, minimize the present during starting and decrease the starting up strength intake.
  • Conserve electric powered energy and gear value, which can remedy the unreasonable scenario of the huge horse-drawn trolley with load commencing machine, preserve the motor ability, increase the electricity issue and motor effectiveness of the grid, decrease reactive energy reduction, preserve electric energy, and simplify the motor commencing products and minimize equipment cost.
  • The transferred torque can be modified, effortless to obtain overload security.When the working equipment is overloaded or jammed, the steel ball variety security coupling will slip automatically, which can avoid the motor from burning out and other parts damage.
  • Besides for the beginning and braking stages, the principal and driven areas of the steel ball protection coupling have no pace difference, no friction reduction and substantial transmission effectiveness.
  • Nonmetallic elastic components are adopted in the metal ball variety safety coupling, which can compensate the offset of the connected 2 axes within a particular assortment, with a little sum of buffering and damping.
  • Trustworthy procedure, secure overall performance, convenient installation, disassembly and maintenance.

Determining the proper type of versatile coupling commences with the pursuing analysis of the application:

  • Primary mover variety (motor, diesel motor, etc.) of the generate facet of the program
  • True horsepower and/or torque demands, not key motor-rated horsepower (observe the variety of variable torque brought on by periodic or unstable loads, worst-case beginning masses,
  • Push system inertia related to primary mover inertia (knowledge accessible from tools provider)
  • vibration, linear and torsional vibration (knowledgeable provider or consultant can assist you evaluate vibration) shaft-to-shaft deviation
  • Observe the diploma of Angle offset (axis is not parallel) and parallel offset (distance amongst axis centers when axes are parallel but not aligned)
  • Also be aware no matter whether the drive/pushed models share the exact same ground axial (inside/exterior) axial motion,
  • whether they share distance (the distance amongst the generate finish and the driven axis), and any other area-related constraints.

In depth Photographs

 

 

We are CZPT to offer you a broad selection of specific couplings, which are dependent on your samples or drawings.

Owing to the refinement of production functions and the high-conclude technological innovation, we have been CZPT to make higher-high quality Rubber Coupling, Trolley Wheel, Adaptable Coupling, Adaptable Rubber Coupling, Industrial Rubber Coupling, Star Coupling, CZPT variety Coupling Spare and other merchandise, widely utilised in industrial apps.

 

All these goods are tested and checked towards the set good quality parameters ahead of getting despatched to the buyer. This exhibits that we are prepared to offer our customers with updated and excellent item lines to fulfill their diverse demands. In addition, we also supply tailored options to provide buyers with a broad variety of space, so that they can select their favourite items according to their demands and specifications.
 

A lot more Merchandise for Choose

 

Coupling Coupling
1613949900 1613982300
1614873800 1613958500
165710800 165710800
162357100 1619646700
1615678500 165714700
1615682500 1604076100
1613982300 1626510900
57150152-669 57150152-670
57150152-679 57150152-667
57150152-672 8829571-075
8829571-079 88290009-996

Ideas:
 
This is only a part of the component numbers, many oil separator filters P/N are not listed, in addition there are replacements filters for several other air compressor brand names.

 

Business Profile

       Now over 100,000 top quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale special discounts. We offer you OEM merchandise as nicely as large good quality replacements, engineered to specific OEM specifications and confirmed to match the precise form, fit and function as the authentic gear. Our organization is committed to continuous innovation and additional advancement to develop, increase the efficiency and productiveness of excellence, to obtain the greatest amount of dependability and functionality.

Company crew

Our firm is situated in the gorgeous coastal metropolis of HangZhou,is a professional company of air compressor filters and separators,

We repect the business spirit of “steadyfastness,difficult function and obligation” and creat a excellent corporate surroundings based on the operation theory of “Integrity,dependability and innovation”.

 

 

With the survival thought of “excellent technological innovation, good services and excellent good quality”,
We constantly adhere to client initial,
intention at serving buyer sincerely and touching buyer with our provider.

We plunge ourselves to provide obvious and sustainable comprssed air to our consumer,
meanwhile continuously go after to help save the sunning expense of compressor technique for them.
Career, concentration, target is our company philosophy.

 

 

FAQ

 Q1. What is your product selection?
A: Our goods include replacement hydraulic filter, Air compressor filters, Compressed air filter factor, Weighty truck insert filters, Vacuum pump filters, and Some spare elements for compressors.

Q2. Is customized filter or OEM available? 
A: Yes, just offer your necessary specs and drawings.

Q3. Can you generate in accordance to the samples?
A: Sure, we can make by your samples or technical drawings. We can develop new molds, but open new mold payment billed, when you place bulk buy, the mould payment can return back again.

This fall. What is actually your phrases of packing?
A: Usually, we pack our products in neutral packing containers,exterior brown carton cases. If you have lawfully registered patent, we can pack the items in your branded bins right after acquiring your authorization letters.

Q5. What’s the conditions of payment?
A: T/T 30% as deposit, and 70% just before shipping. We will display you the photos of the products and offers prior to you shell out the balancing.

Q6. What is actually your conditions of delivery?
A: (1)FOB (2)CFR (3)CIF.

Q7. How about your shipping and delivery time?
A: Generally, underneath MOQ quantity consider 5-7 doing work days following receiving your advance payment. The certain delivery time depends on types and the quantity of your get.
 

To Be Negotiated 1 Piece
(Min. Order)

###

Customized: Non-Customized
Standard Component: Standard Component
Material: Carbon Steel
Category: Cooler
Type: Gear Flex Coupling
MOQ: 1unit

###

Samples:
US$ 111.99/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

High Quality Air Compressor Spare Parts Coupling Element 5.3129.0 for Kaeser Compressor 5.3129e3 E30

###

Coupling Coupling
1613949900 1613982300
1614873800 1613958500
1604140800 1604140800
1623037800 1619646700
1615678500 1604774700
1615682500 1604076100
1613982300 1626510900
02250152-669 02250152-670
02250152-679 02250152-667
02250152-672 88290010-075
88290010-079 88290009-996

###

High Quality Air Compressor Spare Parts Coupling Element 5.3129.0 for Kaeser Compressor 5.3129e3 E30 High Quality Air Compressor Spare Parts Coupling Element 5.3129.0 for Kaeser Compressor 5.3129e3 E30
To Be Negotiated 1 Piece
(Min. Order)

###

Customized: Non-Customized
Standard Component: Standard Component
Material: Carbon Steel
Category: Cooler
Type: Gear Flex Coupling
MOQ: 1unit

###

Samples:
US$ 111.99/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

High Quality Air Compressor Spare Parts Coupling Element 5.3129.0 for Kaeser Compressor 5.3129e3 E30

###

Coupling Coupling
1613949900 1613982300
1614873800 1613958500
1604140800 1604140800
1623037800 1619646700
1615678500 1604774700
1615682500 1604076100
1613982300 1626510900
02250152-669 02250152-670
02250152-679 02250152-667
02250152-672 88290010-075
88290010-079 88290009-996

###

High Quality Air Compressor Spare Parts Coupling Element 5.3129.0 for Kaeser Compressor 5.3129e3 E30 High Quality Air Compressor Spare Parts Coupling Element 5.3129.0 for Kaeser Compressor 5.3129e3 E30

Types of Couplings

A coupling is a device that connects two shafts and transmits power from one to the other. Its main purpose is to join two pieces of rotating equipment. It also allows for some degree of misalignment or end movement. Here are a few examples of coupling types: Beam coupling, Flexible coupling, Magnetic coupling, and Shaft coupling.
gearbox

Beam coupling

Beam couplings are used to couple motors and other devices. They are available in several types, including flexible, slit, and rigid beam couplings. Each has unique properties and characteristics. These couplings are best for applications requiring a high level of precision and long life. They are also a practical solution for the connection of stepping and servo motors with screw rods.
Beam couplings are usually made of stainless steel or aluminum alloy, and feature spiral and parallel cut designs. Multiple cuts allow the coupling to accommodate multiple beams and improve angular and parallel misalignment tolerances. Additionally, beam couplings are comparatively cheaper than other types of rotary joints, and they require minimal maintenance.
The materials of a beam coupling should be considered early in the specification process. They are typically made of aluminum or stainless steel, but they can also be manufactured from Delrin, titanium, and other engineering grade materials. Beam couplings are often available in multiple sizes to fit specific shaft diameters.
Beam couplings are a key component of motion control systems. They provide excellent characteristics when used properly, and they are a popular choice for many applications. A thorough understanding of each type of coupling will help to prevent coupling failure and enhance system performance. Therefore, it is important to choose the right coupling for your application.
Various types of beam couplings have unique advantages and disadvantages. The FCR/FSR design has two sets of three beams. It is available in both metric and inch shaft sizes. The FCR/FSR couplings are ideal for light-duty power transmission applications. A metric shaft is more suitable for these applications, while an inch shaft is preferred for heavier duty applications.
Two types of beam couplings are available from Ruland. The Ruland Flexible beam coupling has a multi-helical cut design that offers a greater flexibility than commodity beam couplings. This design allows for higher torque capabilities while minimizing wind-up. In addition, it is also more durable than its commodity counterparts.

Flexible coupling

A flexible coupling is a versatile mechanical connection that allows for the easy coupling of two moving parts. The design of these couplings allows for a variety of stiffness levels and can address a variety of problems, such as torsional vibrations or critical speed. However, there are a number of tradeoffs associated with flexible couplings.
One of the biggest issues is the installation of the coupling, which requires stretching. This problem can be exacerbated by cold temperatures. In such a case, it is vital to install the coupling properly. Using a gear clamp is one of the most important steps in a successful installation. A gear clamp will keep the coupling in place and prevent it from leaking.
Another common type of flexible coupling is the gear coupling. These couplings are composed of two hubs with crowned external gear teeth that mesh with two internally splined flanged sleeves. The massive size of the teeth makes them resemble gears. Gear couplings offer good torque characteristics but require periodic lubrication. These couplings can also be expensive and have a limited number of applications.
Another type of flexible coupling is the SDP/SI helical coupling. These couplings can accommodate axial motion, angular misalignment, and parallel offset. This design incorporates a spiral pattern that makes them flexible. These couplings are available in stainless steel and aluminum.
A flexible coupling has a wide range of applications. Generally, it is used to connect two rotating pieces of equipment. Depending on its design, it can be used to join two pieces of machinery that move in different directions. This type of coupling is a type of elastomeric coupling, which has elastic properties.
There are many types of flexible couplings available for different types of applications. The purpose of a flexible coupling is to transmit rotational power from one shaft to another. It is also useful for transmitting torque. However, it is important to note that not all flexible couplings are created equally. Make sure to use a reputable brand for your coupling needs. It will ensure a reliable connection.
The simplest and most commonly used type of flexible coupling is the grid coupling. This type of coupling uses two hubs with slotted surfaces. The steel grid is allowed to slide along these slots, which gives it the ability to flex. The only limitation of this type of coupling is that it can only tolerate a 1/3 degree misalignment. It can transmit torques up to 3,656 Nm.
gearbox

Magnetic coupling

Magnetic coupling is a technique used to transfer torque from one shaft to another using a magnetic field. It is the most common type of coupling used in machinery. It is highly effective when transferring torque from a rotating motor to a rotating shaft. Magnetic couplings can handle high torques and high speeds.
Magnetic coupling is described by the energy difference between a high-spin state and a broken symmetry state, with the former being the energy of a true singlet state. In single-determinant theories, this energy difference is called the Kij. Usually, the broken-symmetry state is a state with two interacting local high-spin centers.
The magnetic coupling device is regarded as a qualitative leap in the reaction still industry. It has solved a number of problems that had plagued the industry, including flammability, explosiveness, and leakage. Magnetic couplings are a great solution for many applications. The chemical and pharmaceutical industries use them for various processes, including reaction stills.
Magnetic couplings are a good choice for harsh environments and for tight spaces. Their enclosed design keeps them fluid and dust-proof. They are also corrosion-resistant. In addition, magnetic couplings are more affordable than mechanical couplings, especially in areas where access is restricted. They are also popular for testing and temporary installations.
Another use for magnetic coupling is in touch screens. While touch screens use capacitive and resistive elements, magnetic coupling has found a cool new application in wireless charging. While the finger tracking on touch screens may seem like a boley job, the process is very sensitive. The devices that use wireless charging need to have very large coils that are locked into resonant magnetic coupling.
Magnetic couplings also help reduce hydraulic horsepower. They cushion starts and reduce alignment problems. They can also improve flow in oversized pumps. A magnetic coupling with an 8 percent air gap can reduce hydraulic HP by approximately 27 percent. In addition, they can be used in aggressive environments. They also help reduce repair costs.
Magnetic couplings are a great choice for pumps and propeller systems because they have the added advantage of being watertight and preventing shaft failure. These systems also have the benefit of not requiring rotating seals.
gearbox

Shaft coupling

A shaft coupling joins two shafts and transmits rotational motion. Generally, shaft couplings allow for some degree of misalignment, but there are also torque limiters. Selecting the right coupling can save you time and money and prevent equipment downtime. Here are the main features to consider when purchasing a coupling for your application.
Shaft couplings should be easy to install and disassemble, transmit full power to the mated shaft, and reduce shock loads. A shaft coupling that does not have projecting parts should be used for machines that move or rotate at high speeds. Some types of shaft couplings are flexible while others are rigid.
Shaft couplings can be used in a variety of applications, including piping systems. They can be used to connect shafts that are misaligned and help maintain alignment. They can also be used for vibration dampening. Shaft couplings also allow shafts to be disconnected when necessary.
Shaft couplings can accommodate a certain amount of backlash, but this backlash must be well within the tolerance set by the system. Extremely high backlash can break the coupling and cause excessive wear and stress. In addition, excessive backlash can lead to erratic alignment readings. To avoid these issues, operators must reduce backlash to less than 2deg.
Shaft couplings are often referred to by different names. Some are referred to as “sliced” couplings while others are known as “slit” couplings. Both types offer high torque and torsional stiffness. These couplings are typically made from metals with various alloys, such as acetal, stainless steel, or titanium.
CZPT Pulley produces shaft couplings for a variety of applications. These products are used in high-power transmission systems. They have several advantages over friction couplings. In addition to minimizing wear, they don’t require lubrication. They are also capable of transmitting high torque and high speeds.
Another type of shaft coupling is the universal coupling. It is used to transmit power to multiple machines with different spindles. Its keyed receiving side and flanges allow it to transmit power from one machine to another.
China High Quality Air Compressor Spare Parts Coupling Element 5.3129.0 for Kaeser Compressor 5.3129e3 E30     coupling beamChina High Quality Air Compressor Spare Parts Coupling Element 5.3129.0 for Kaeser Compressor 5.3129e3 E30     coupling beam
editor by czh 2023-01-06